Set-up Step-by-Step

  1. Download the app from Apple Store.

  2. Plug  your Niwa into the correct power outlet. 

  3. Wait few seconds until you see the indication LED blinking underneath the grow bed.

  4. Launch your Niwa app.

  5. Sign-up (if it’s the first time you’re using your Niwa) and follow the steps in your screen.

  6. You will receive an activation code to your email.

  7. Input your activation code in the app and sign in with your credentials.

  8. Now disconnect the mobile data in your cell phone.

  9. If the LED indicator is not blinking blue. Push and hold the start button 2-6 seconds until the LED indicator starts blinking in blue. Release the button immediately after the LED starts blinking blue.

  10. Once it’s blinking blue you will connect to your Niwa One via WiFi to setup and connect it to your home WiFi network. To do so, go to your cell phone WiFi settings and connect to a network titled  “Photon XXXX” (or similar). There is no password required.

  11. Then your Niwa One will scan available WiFi networks and display them in your Niwa app. Choose your home Internet WiFi network and connect to it, the app will ask your home Internet WiFi password.

  12. Wait until the LED indicator starts blinking slowly in white.

  13. Now you can connect your mobile data again.

  14. Then after a short time you’ll be able to see your Niwa One’s dashboard.